POE SWITCHING POWER SUPPLY & ADAPTER
POE-A4810
Over View:
PoE (Power over Ethernet) adapter provide a power solution for the related device, it can supply power and simultaneously be a media for data transfer in anywhere there is a cat5 cable.
General Specification:
Model:POE-A4810
Input:AC100-240V, 50-60Hz
Output:DC48V, 1000mA; 48W
Key Feature:
1. Strong resistance of interference, high reliability
2. Low DC ripple, high efficiency, low standby power consumption, lower alorific value, natural cooling, long service life.
3. Broad input voltage range (100-240VAC), conform to multinational use standard.
4. Excellent insulating performance, higher dielectric intensity.
5. Good load capacity, constant current & constant voltage, wider adaptive range, over-voltage protection for input and output, short-cut protection, over-current protection.
6. The shell is made of flame resisted engineering plastic, which greatly improve the equipment using safety
7. Transmission Distance: Max.100 meters (CAT 5 or better cable). It specifically depends on the quality of network cable, supply voltage and adaptability of power device for voltage. The higher quality of network cable, the voltage drop will be less, and the effective power distance will be further accordingly.
INPUT CHARACTERISTICS:
Direct Feeding=Plug and supplying power, supplying power directly without advanced detection for Power Device (PD)
Technical Specification
|
Input Voltage/Frequency
|
AC100-240V; 50-60Hz
|
|
Input Adjusting Range
|
AC90-264V; 47Hz~63Hz
|
|
Output Voltage/Current
|
48V, 1000mA; 48W
|
|
Line Regulation
|
±3%
|
|
Load Regulation
|
±5%
|
|
Network Port Mark
|
Data&Power Out=Power pin (4/5 “+” & 7/8 “-”) + Data pin (12/36)
Data In=Data pin (12/36)
|
|
Transmission Rate
|
10M/100Mbps
|
|
LED Power Indicator
|
Green Color;
Indicator On: Power in normal working condition;
Indicator Off: Power supply failure;
Note: When the power in normal working condition, after connecting network cable, the indicator off means it’s in over-load protection or shortcut status, it should be the requiring power of powered device is too high, network cable is shortcut or the powered device is broken.
|
|
System Reliability
|
MTBF＞100khours
|
|
Operating Environment
|
Operating/Ambient Temperature: -15℃~55℃
|
|
Relative Humidity: 5%~90%RH
|
|
Operating and Storing Place: Ventilation and heat dissipation, Clean, No conductive dust, No corrosive gas
|
|
Place of No dangerous of explosion
|
|
Safety Assurance
|
Conducted Emission(CE) and Radiated Emission(RE) compliant with EN60950, CE, FCC standard
|
|
Dimension/Weight
|
96mm×47mm×30mm; 100g
|
|
Power Plug Specs
|
EU/US/UK/AU Plug are available
|
|
Lightning Protection
|
AC Input can stand 5 times positive & negative 5KV, 8/20uS instantaneous current wave, lasting 1 minutes each time. The lightning protection circuit of the power adapter have invalidation alarming function and protective components like glass protective tube
|
|
Application
|
This is ordinary switching power supply, great protective performance, superior stability and adaptability connecting with power device, its scope of application include security surveillance, wireless access point, electrical machine, communication equipment, health care products and those POE supported equipment.
|
|
Warranty
|
One year
|
|
|
48Vdc,1A,48W Wallmounted POE Injector PoE Adapter Images
|
